| |
|
News & Updates from STMicroelectronics
July 2008
|
| |
| |
|
|
| |
|
| New
1MHz EEPROMs in densities up to 1 Mbit
Worldwide #1 in EEPROM, ST introduces 1MHz
two-wire serial EEPROMs in 256 Kbit, 512 Kbit and 1
Mbit densities, compatible with I2C Fast-Mode-Plus allowing
data rates up to 2.5-times faster than the I2C Fast-mode.
Latest technology delivers speed and cost advantages,
with low-voltage compatibility. More
|
|
| First
prototypes of disposable insulin Nanopump™
ST has recently announced the availability
of the first evaluation prototypes of the miniaturized
insulin Nanopump. The device, developed by Debiotech
and industrialized by ST, can be mounted on a disposable
skin patch to provide continuous insulin infusion, enabling
substantial advancements in the quality of life of diabetic
patients. More
|
|
| ST
boosts 32-bit design flexibility with major extension
of STM32 MCUs
ST has increased both the scalability and
peripheral options of its breakthrough 32-bit STM32
MCU family. The new members include up to 512 Kbytes
of Flash, extra SRAM and new peripherals which enhance
the low-power ARM Cortex-M3-based family. With total
compatibility across 46 devices, the STM32 family offers
unlimited possibilities.
More
|
|
| LISx44ALH
- new high-performance analog accelerometers
ST has recently enhanced its MEMS product
portfolio by introducing the LIS244ALH and LIS344ALH
high-performance analog accelerometers to address applications
in the demanding industrial, telecom and computing markets.
The LISx44ALH series combines the benefits of reduced
space and power consumption in battery-operated devices
with extremely tight offset and sensitivity accuracy
and very low output noise. More
|
|
| VIPer17
- offline converter for high-efficiency, cost-effective
switch mode power supplies
VIPer17 is an innovative high-voltage converter
suitable for very smart, cost-effective power supplies.
It includes both a power section and a controller in
one package. The power section is avalanche rugged and
has a breakdown voltage of 800 V, ensuring robustness
and reliability. The controller, designed with advanced
BCD technology, works with a current mode technique
and is suitable for flyback converters. It runs with
fixed frequency with jittering. Both 60 kHz and 115
kHz versions are available. More
|
|
|
| SPEAr
BASIC - 65nm ARM®926 with 300kGates Structured ASIC
Fabric
The latest member of the SPEAr family, manufactured
in 65 nm process technology, provides cost efficiency,
computing power and customizability for various embedded
applications, including entry-level printers, fax machines,
digital photo frames, voice-over-IP and other equipment.
SPEAr Basic offers ASIC-like flexibility at a fraction
of the development time and cost required by a full
custom-design approach. More
|
|
| EMIF06-AUD01F2
- space saving single-chip IPAD audio connector in flip-chip
package
The EMIF06-AUD01F2 is optimized for portable
device audio interfacing. It provides EMI filtering
and ESD protection for 2 differential microphone lines
and 2 headset speaker lines, and includes biasing-circuit
integration in only 4.65 mm². Its excellent stop
band (800 MHz-2480 MHz), attenuation (>-30 dB, thanks
to a 4 x 1.3 nF high density capacitor), and its very
low total harmonic distortion (THD) on microphone lines
(THD < -75 dB) make the EMIF06-AUD01F2 well suited
to high-end, high audio quality mobile phones. By integrating
high-robustness 15 kV air and contact ESD protection
diodes which provide very low clamping voltage down
to 20 V, the EMIF06-AUD01F2 provides a high level of
protection for highly sensitive circuits. More
|
|
| STCL1120
- fast and reliable 12 MHz fixed-frequency silicon oscillator
ST is introducing the STCL1xx0 family of
silicon oscillators that can replace crystals and ceramic
resonators in applications that do not require precise
accuracy. Compared to crystals or ceramic resonators,
silicon oscillators offer the advantages of faster start-up,
smaller size and improved immunity to shock, vibration
and electromagnetic interference (EMI). More
|
|
| RF
power design kits - new tools for high-performance RF
power amplifier designs
New application support kits that help evaluate
the features and performance of ST RF power transistors
in power amplifier designs have been developed. These
kits help reduce customer design cycle time and costs
for wireless applications. They provide useful support
information, such as S-parameter measurements under
different bias conditions, reference boards, spice models,
electrical schematics and BOM lists. More
|
|
You are receiving this newsletter because you have registered
on St's web site and have opted to receive newsletters and other
communications from ST based on topics of your interest. We thank
you for your interest and hope that you find this information
useful
FORWARD TO OR FROM A COLLEAGUE
Do not hesitate to forward this newsletter to colleagues and
friends who might find it useful.If you received this e-mail from a colleague and would like
to subscribe to receive your own copy in the future, please
proceed to our registration page.
UPDATE YOUR PREFERENCES OR UNSUBSCRIBE
If you wish to change your topics of interest, click here
to update your registration profile. This email
was sent to (%Email%). If you do not wish to continue receiving
this newsletter, please click here
to unsubscribe
permanently.
LET US KNOW WHAT YOU THINK
If you have any suggestion or comment about the content, presentation
and distribution of this newsletter, we would like to hear from
you. Please email
us your feedback.
| |
)
