About ST
Products
Applications
Support
Buy
News & Events
ST Worldwide
Contact Us
Login
Datasheets
|
Transistors
|
IGBTs
|
600V
N-CHANNEL 10A - 600V - TO-220/D2PAK - SHORT CIRCUIT RATED PowerMESH TM IGBT
Datasheet
Format:
(597 kb)
or
(13 kb)
Last Updated: 16/02/2007
Pages: 17
Related Information
IGBTs Product Page
Raw Ascii Text
- (
Hide
)
(Unformatted textual content of the document used by search engines)
STGB10NC60K - STGD10NC60K STGP10NC60K
N-channel 600V - 10A - D2PAK / TO-220 / DPAK Shor t circuit rated PowerMESHTM IGBT
General features
Type STGB10NC60K STGP10NC60K STGD10NC60K
VCES 600V 600V 600v
VCE(sat)Max @25C <2.5V <2.5V <2.5V
IC @100C 10A 10A 10A
3
3 1 2
1
D²PAK
Lower on voltage drop (Vcesat) Lower CRES / CIES ratio (no cross-conduction susceptibility) Very soft ultra fast recovery antiparallel diode Short circuit withstand time 10s
TO-220
3 1
DPAK
Description
Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESHTM IGBTs, with outstanding performances. The suffix "K" identifies a family optimized for high frequency motor control applications with short circuit withstand capability.
Internal schematic diagram
Applications
High frequency motor controls SMPS and PFC in both hard switch and resonant topologies Motor drivers
Order codes
Part number STGB10NC60KT4 STGP10NC60K STGD10NC60KT4 Marking GB10NC60K GP10NC60K GD10NC60K Package D²PAK TO-220 DPAK Packaging Tape & reel Tube Tape & reel
February 2007
Rev 5
1/17
www.st.com 17
Contents
STGB10NC60K - STGP10NC60K - STGD10NC60K
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) . . .. . .. . .. . .. . ..... 6
3 4 5 6
Test circuit
. . .. . .. . .. . .. . .. . .. . .. . .. . .... 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/17
STGB10NC60K - STGP10NC60K - STGD10NC60K
Electrical ratings
1
Electrical ratings
Table 1.
Symbol VCES IC(1) IC(1) ICM(2) VGE PTOT Tstg Tj Tscw Tl
Absolute maximum ratings
Parameter Collector-emitter voltage (VGS = 0) Collector current (continuous) at TC = 25C Collector current (continuous) at TC = 100C Collector current (pulsed) Gate-emitter voltage Total dissipation at TC = 25C Storage temperature 55 to 150 Operating junction temperature Shor t circuit withstand time Maximum lead temperature for soldering purpose (for 10sec. 1.6 mm from case)
T T J ---- A --C I ( T ) = -----------------------------------------M------X----------------------------------------------CC R ×V (T , I ) THJ C CESAT(MAX) C C
Value 600 20 10 30 20 60
Unit V A A A V W C s C
10 300
1. Calculated according to the iterative formula:
2. Pulse width limited by max junction temperature
Table 2.
Symbol Rthj-case Rthj-amb
Thermal resistance
Parameter Thermal resistance junction-case Max Thermal resistance junction-ambient Max Value 2.08 62.5 Unit C/W C/W
3/17
Electrical characteristics
STGB10NC60K - STGP10NC60K - STGD10NC60K
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 3.
Symbol VBR(CES) VCE(sat) VGE(th) ICES IGES gfs
Static
Parameter Collector-emitter breakdown voltage Test conditions IC= 1mA, VGE= 0 Min. 600 2.2 1.8 4.5 2.5 Typ. Max. Unit V V V V A mA nA S
Collector-emitter saturation VGE= 15V, IC= 5A voltage VGE= 15V, IC= 5A, Tc= 125C Gate threshold voltage Collector cut-off current (VGE = 0) Gate-emitter leakage current (VCE = 0) Forward transconductance VCE= VGE, IC= 250 A VCE= Max Rating,TC= 25C VCE=Max Rating,TC= 125C VGE= 20V, VCE= 0 VCE = 15V, IC= 5A
6.5 150 1 100 15
Table 4.
Symbol Cies Coes Cres Qg Qge Qgc
Dynamic
Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Test conditions VCE = 25V, f = 1MHz, VGE = 0 VCE = 390V, IC = 5A, VGE = 15V, (see Figure 16) Min. Typ. 380 46 8.5 19 5 9 Max. Unit pF pF pF nC nC nC
4/17
STGB10NC60K - STGP10NC60K - STGD10NC60K
Electrical characteristics
Table 5.
Symbol td(on)
Switching on/off (inductive load)
Parameter Test conditions VCC = 390V, IC = 5A , RG= 10 VGE= 15V, Tj= 25C (see Figure 17) VCC = 390V, IC = 5A , RG= 10 VGE= 15V, Tj=125C (see Figure 17) Vcc = 390V, IC = 5A, , RGE = 10 VGE = 15V,TJ=25C (see Figure 17) Vcc = 390V, IC = 5A, RGE=10 VGE =15V, Tj=125C , (see Figure 17) Min. Typ. 17 6 655 16.5 6.5 575 33 72 82 60 106 136 Max. Unit ns ns A/s ns ns A/s ns ns ns ns ns ns
Turn-on delay time tr Current rise time (di/dt)on Turn-on current slope Turn-on delay time tr Current rise time (di/dt)on Turn-on current slope tr(Voff) td(off) tf tr(Voff) td(off) tf Off voltage rise time Turn-off delay time Current fall time Off voltage rise time Turn-off delay time Current fall time td(on)
Table 6.
Symbol Eon(1) Eoff(2) Ets Eon(1) Eoff(2) Ets
Switching energy (inductive load)
Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching losses Total switching losses Test conditions VCC = 390V, IC = 5A , RG= 10 VGE=15V, Tj=25C (see Figure 17) VCC = 390V, IC = 5A , RG= 10 VGE= 15V, Tj= 125C (see Figure 17) Min Typ 55 85 140 87 162 249 Max Unit J J J J J J
1. Eon is the tun-on losses when a typical diode is used in the test circuit in figure 2. If the IGBT is offered in a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the same temperature (25C and 125C) 2. Turn-off losses include also the tail of the collector current
5/17
Electrical characteristics
STGB10NC60K - STGP10NC60K - STGD10NC60K
2.1
Figure 1.
Electrical characteristics (curves)
Output characteristics Figure 2. Transfer characteristics
Figure 3.
Transconductance
Figure 4.
Collector-emitter on voltage vs temperature
Figure 5.
Gate charge vs gate-source voltage Figure 6.
Capacitance variations
6/17
STGB10NC60K - STGP10NC60K - STGD10NC60K Figure 7. Normalized gate threshold voltage vs temperature Figure 8.
Electrical characteristics Collector-emitter on voltage vs collector current
Figure 9.
Normalized breakdown voltage vs temperature
Figure 10. Switching losses vs temperature
Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector current
7/17
Electrical characteristics Figure 13. Thermal impedance
STGB10NC60K - STGP10NC60K - STGD10NC60K Figure 14. Turn-off SOA
8/17
STGB10NC60K - STGP10NC60K - STGD10NC60K
Test circuit
3
Test circuit
Figure 16. Gate charge test circuit
Figure 15. Test circuit for inductive load switching
Figure 17. Switching waveform
Figure 18. Diode recovery time waveform
9/17
Package mechanical data
STGB10NC60K - STGP10NC60K - STGD10NC60K
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
10/17
STGB10NC60K - STGP10NC60K - STGD10NC60K
Package mechanical data
TO-220 MECHANICAL DATA
DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP M AX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. M AX . 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154
øP
Q
11/17
Package mechanical data
STGB10NC60K - STGP10NC60K - STGD10NC60K
D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA
mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 4 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 T YP M AX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch
3
1
12/17
STGB10NC60K - STGP10NC60K - STGD10NC60K
Package mechanical data
DPAK MECHANICAL DATA
mm. DIM. MIN. A A1 A2 B b4 C C2 D D1 E E1 e e1 H L (L1) L2 L4 R V2 2.2 0.9 0.03 0.64 5.2 0.45 0.48 6 5.1 6.4 4.7 2.28 4.4 9.35 1 2.8 0.8 0.6 0.2 0 8 0 1 0.023 0.008 8 4.6 10.1 0.173 0.368 0.039 0.110 0.031 0.039 6.6 0.252 0.185 0.090 0.181 0.397 TYP MAX. 2.4 1.1 0.23 0.9 5.4 0.6 0.6 6.2 MIN. 0.086 0.035 0.001 0.025 0.204 0.017 0.019 0.236 0.200 0.260 TYP. MAX. 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 inch
0068772-F
13/17
Packaging mechanical data
STGB10NC60K - STGP10NC60K - STGD10NC60K
5
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1. 5 12.8 20.2 24.4 100 30. 4 26. 4 13. 2 mm MIN. MAX . 330 0. 059 0.504 0.520 0795 0.960 1.039 3. 937 1.197 BULK QTY 1000 i n ch MIN. MAX. 12. 992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MI N. 10. 5 15. 7 1.5 1. 59 1. 65 11.4 4.8 3.9 11.9 1.9 50 0. 25 23. 7 24.3 MAX. 10.7 15.9 1. 6 1.61 1.85 11.6 5. 0 4. 1 12.1 2. 1 i n ch MI N. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
* on sales type
14/17
STGB10NC60K - STGP10NC60K - STGD10NC60K
Packaging mechanical data
DPAK FOOTPRINT
All dimensions are in millimeters
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1. 5 12.8 20.2 16.4 50 22. 4 18. 4 13. 2 mm MIN. MAX . 330 0. 059 0.504 0.520 0. 795 0.645 0.724 1. 968 0.881 BULK QTY 2500 i n ch MIN. MAX. 12. 992
TAPE MECHANICAL DATA
DIM. A0 B0 B1 D D1 E F K0 P0 P1 P2 R
W
BASE QTY 2500
mm MIN. 6. 8 10.4 1. 5 1. 5 1.65 7. 4 2.55 3. 9 7. 9 1. 9 40
15.7 16.3
inch MIN. MAX . 7 0.267 0.275 0.409 0.417 0.476 0.059 0.063 0. 059 0.065 0.073 0.291 0.299 0.100 0.108 0.153 0.161 0.311 0.319 0.075 0.082 1. 574
0.618 0.641
MAX . 10. 6 12. 1 1.6 1. 85 7.6 2. 75 4.1 8.1 2.1
15/17
Revision history
STGB10NC60K - STGP10NC60K - STGD10NC60K
6
Revision history
Table 7.
Date 21-Nov-2005 06-Dic-2005 06-Mar-2006 06-Jun-2006 08-Feb-2007
Revision history
Revision 1 2 3 4 5 New release Inser ted row on Table 1.: Absolute maximum ratings The document has been reformatted Inser ted DPAK Description has been updated Changes
16/17
STGB10NC60K - STGP10NC60K - STGD10NC60K
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
17/17
Document Number: 11842
Untitled Document
Further Information
Contact
Online Support
(Registration Required)
(597 kb)
