Datasheets | Transistors | IGBTs | IGBTs, 600V

N-channel 14A - 600V -DPAK - D²PAK short circuit rated PowerMESH" IGBT

Datasheet

Format: (439 kb)

Last Updated: 23/10/2008

Pages: 16

Raw Ascii Text- ( Hide )
(Unformatted textual content of the document used by search engines)

STGB14NC60K STGD14NC60K
N-channel 14A - 600V -DPAK - D2PAK Shor t circuit rated PowerMESHTM IGBT
General features
Type STGB14NC60K STGD14NC60K

VCES 600V 600V

VCE(sat) (Max)@ 25C <2.5V <2.5V

IC @100C 14A 14A
3
3 1

Low on-voltage drop (Vcesat) Low Cres / Cies ratio ( no cross conduction susceptibility) Short circuit withstand time 10s

1

D²PAK

DPAK

Description
Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the Power MESHTM IGBTs, with outstanding performances. The suffix "K" identifies a family optimized for high frequency motor control applications with short circuit withstand capability.

Internal schematic diagram

Applications

High frequency inverters Motor drivers with short circuit protection

Order codes
Part number STGB14NC60KT4 STGD14NC60KT4 Marking GB14NC60K GD14NC60K Package D²PAK DPAK Packaging Tape & reel Tape & reel

July 2006

Rev 1

1/16
www.st.com 16

Contents

STGB14NC60K - STGD14NC60K

Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) . . .. . .. . .. . .. . ... 6

3 4 5 6

Test circuit

. . .. . .. . .. . .. . .. . .. . .. . .. . .... 9

Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2/16

STGB14NC60K - STGD14NC60K

Electrical ratings

1

Electrical ratings
Table 1.
Symbol VCES IC IC
(1) (1)

Absolute maximum ratings
Parameter Collector-emitter voltage (VGS = 0) Collector current (continuous) at TC = 25C Collector current (continuous) at TC = 100C Collector current (pulsed) Gate-emitter voltage Total dissipation at TC = 25C Shor t circuit withstand time, VCE = 0.5VBR(CES) , Tj = 125C, RG = 10, VGE = 12V Storage temperature 55 to 150 Operating junction temperature C Value 600 25 14 50 20 80 10 Unit V A A A V W s

ICL (2) VGE PTOT tscw Tstg Tj
1.

Calculated according to the iterative formula:

T T J ---- A --C I ( T ) = -----------------------------------------M------X----------------------------------------------CC R ×V (T , I ) THJ C CESAT(MAX) C C

2. Vclamp = 480V, Tj =150C, RG = 10, VGE = 15V

Table 2.
Symbol

Thermal resistance
Parameter Value 1.25 62.5 Unit C/W C/W

Rthj-case Thermal resistance junction-case max Rthj-amb Thermal resistance junction-ambient max

3/16

Electrical characteristics

STGB14NC60K - STGD14NC60K

2

Electrical characteristics
(TCASE=25C unless otherwise specified) Table 3.
Symbol VBR(CES) IGES ICES VGE(th) VCE(SAT) gfs (1)

Static
Parameter Test condictions Min. 600 100 150 1 4.5 2.0 1.8 3 6.5 2.5 Typ. Max. Unit V nA A mA V V V S

Collector-emitter breakdown IC= 1mA, VGE= 0 voltage Gate-emitter leakage current (VCE = 0) Collector cut-off current (VGE = 0) Gate threshold voltage Collector-emitter saturation voltage Forward transconductance VGE= 20V , VCE= 0 VCE= Max rating, TC= 25C VCE= Max rating, TC= 125C VCE= VGE, IC= 250A VGE= 15V, IC= 7A VGE= 15V, IC= 7A, Tc= 125C VCE = 15V , IC = 7A

1. Pulsed: Pulse duration = 300 s, duty cycle 1.5%

Table 4.
Symbol Cies Coes Cres Qg Qge Qgc

Dynamic
Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Test condictions Min. Typ. 760 86 15.5 34.4 8.1 16.4 Ma x . Unit pF pF pF nC nC nC

VCE = 25V, f = 1 MHz, VGE= 0

VCE = 390V, IC = 7A, VGE = 15V (see Figure 17)

4/16

STGB14NC60K - STGD14NC60K

Electrical characteristics

Table 5.
Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on tr(Voff) td(off) tf tr(Voff) td(off) tf

Switching on/off (inductive load)
Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope Off voltage rise time Turn-off delay time Current fall time Off voltage rise time Turn-off delay time Current fall time Test condictions VCC = 390V, IC = 7A , RG= 10 VGE= 15V, Tj= 25C (see Figure 16) VCC = 390V, IC = 7A , RG= 10 VGE= 15V, Tj= 125C (see Figure 16) Vcc = 390V, IC = 7A, RGE = 10 , VGE = 15V TJ = 25C (see Figure 16) Vcc = 390V, IC = 7A, RGE = 10 , VGE = 15V Tj = 125C (see Figure 16) Min. Typ. 22.5 8.5 700 22 9.5 680 60 116 75 24 196 144 Max. Unit ns ns A/s ns ns A/s ns ns ns ns ns ns

Table 6.
Symbol Eon (1) Eoff Ets
(2)

Switching energy (inductive load)
Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching losses Total switching losses Test condictions VCC = 390V, IC = 7A , RG= 10 VGE= 15V, Tj= 25C (see Figure 16) VCC = 390V, IC = 7A RG= 10 VGE= 15V, , Tj= 125C (see Figure 16) Min Typ. 82 155 237 131 370 501 Max Unit J J J J J J

Eon (1) Eoff (2) Ets

1. Eon is the turn-on losses when a typical diode is used in the test circuit in figure 2. If the IGBT is offered in a package with a co-pack diode, the co-pack diode is used as external diode. IGBTs & DIODE are at the same temperature (25C and 125C) 2. Turn-off losses include also the tail of the collector current.

5/16

Electrical characteristics

STGB14NC60K - STGD14NC60K

2.1
Figure 1.

Electrical characteristics (curves)
Output characterisics Figure 2. Transfer characteristics

Figure 3.

Transconductance

Figure 4.

Collector-emitter on voltage vs temperature

Figure 5.

Collector-emitter on voltage vs collector current

Figure 6.

Normalized gate threshold vs temperature

6/16

STGB14NC60K - STGD14NC60K Figure 7. Normalized breakdown voltage vs temperature Figure 8.

Electrical characteristics Gate charge vs gate-emitter voltage

Figure 9.

Capacitance variations

Figure 10. Switching losses vs temperature

Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector current

7/16

Electrical characteristics Figure 13. Thermal impedance

STGB14NC60K - STGD14NC60K Figure 14. Turn-off SOA

Figure 15. Thermal impedance for D²PAK

8/16

STGB14NC60K - STGD14NC60K

Test circuit

3

Test circuit
Figure 17. Gate charge test circuit

Figure 16. Test circuit for inductive load switching

Figure 18. Switching waveforms

Figure 19. Diode recovery times waveform

9/16

Package mechanical data

STGB14NC60K - STGD14NC60K

4

Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com

10/16

STGB14NC60K - STGD14NC60K

Package mechanical data

D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA
mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 4 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 T YP M AX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch

3

1

11/16

Package mechanical data

STGB14NC60K - STGD14NC60K

DPAK MECHANICAL DATA
mm. DIM. MIN. A A1 A2 B b4 C C2 D D1 E E1 e e1 H L (L1) L2 L4 R V2 2.2 0.9 0.03 0.64 5.2 0.45 0.48 6 5.1 6.4 4.7 2.28 4.4 9.35 1 2.8 0.8 0.6 0.2 0 8 0 1 0.023 0.008 8 4.6 10.1 0.173 0.368 0.039 0.110 0.031 0.039 6.6 0.252 0.185 0.090 0.181 0.397 TYP MAX. 2.4 1.1 0.23 0.9 5.4 0.6 0.6 6.2 MIN. 0.086 0.035 0.001 0.025 0.204 0.017 0.019 0.236 0.200 0.260 TYP. MAX. 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 inch

0068772-F

12/16

STGB14NC60K - STGD14NC60K

Packaging mechanical data

5

Packaging mechanical data
DPAK FOOTPRINT

All dimensions are in millimeters

TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1. 5 12.8 20.2 16.4 50 22. 4 18. 4 13. 2 mm MIN. MAX . 330 0. 059 0.504 0.520 0. 795 0.645 0.724 1. 968 0.881 BULK QTY 2500 i n ch MIN. MAX. 12. 992

TAPE MECHANICAL DATA
DIM. A0 B0 B1 D D1 E F K0 P0 P1 P2 R
W

BASE QTY 2500

mm MIN. 6. 8 10.4 1. 5 1. 5 1.65 7. 4 2.55 3. 9 7. 9 1. 9 40
15.7 16.3

inch MIN. MAX . 7 0.267 0.275 0.409 0.417 0.476 0.059 0.063 0. 059 0.065 0.073 0.291 0.299 0.100 0.108 0.153 0.161 0.311 0.319 0.075 0.082 1. 574
0.618 0.641

MAX . 10. 6 12. 1 1.6 1. 85 7.6 2. 75 4.1 8.1 2.1

13/16

Packaging mechanical data

STGB14NC60K - STGD14NC60K

D2PAK FOOTPRINT

TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1. 5 12.8 20.2 24.4 100 30. 4 26. 4 13. 2 mm MIN. MAX . 330 0. 059 0.504 0.520 0795 0.960 1.039 3. 937 1.197 BULK QTY 1000 i n ch MIN. MAX. 12. 992

TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MI N. 10. 5 15. 7 1.5 1. 59 1. 65 11.4 4.8 3.9 11.9 1.9 50 0. 25 23. 7 24.3 MAX. 10.7 15.9 1. 6 1.61 1.85 11.6 5. 0 4. 1 12.1 2. 1 i n ch MI N. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956

BASE QTY 1000

* on sales type

14/16

STGB14NC60K - STGD14NC60K

Revision history

6

Revision history
Table 7.
Date 12-Jul-2006

Revision history
Revision 1 New release Changes

15/16

STGB14NC60K - STGD14NC60K

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com

16/16

Document Number: 12577

Untitled Document

Further Information
Contact Online Support (Registration Required)



All rights reserved © 2010 STMicroelectronics :: Terms Of Use :: Privacy Policy