Datasheets | Transistors | IGBTs | IGBTs, 600V

N-channel 10A - 600V - DPAK - Very fast PowerMESH IGBT

Datasheet

Format: (426 kb)

Last Updated: 12/04/2007

Pages: 14

Raw Ascii Text- ( Hide )
(Unformatted textual content of the document used by search engines)

STGD10NC60H
N-channel 10A - 600V - DPAK Ver y fast PowerMESHTM IGBT
Features
Type STGD10NC60H

VCES 600V

IC VCE(sat) (Max)@ 25C @100C < 2.5V 10A
3 1

Low on-voltage drop (Vcesat) Low CRES / CIES ratio (no cross-conduction susceptibility)
DPAK

Description
Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESHTM IGBTs, with outstanding performances. The suffix "H" identifies a family optimized for high frequency applications in order to achieve very high switching performances (reduced tfall) manta in ing a low voltage drop.

Internal schematic diagram

Applications

High frequency motor controls SMPS and PFC in both hard switch and resonant topologies Motor drivers

Order code
Part number STGD10NC60H Marking GD10NC60H Package DPAK Packaging Tape & reel

April 2007

Rev 1

1/14
www.st.com 14

Contents

S T G D 1 0 N C6 0 H

Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) . . .. . .. . .. . .. . ..... 6

3 4 5 6

Test circuits

. . .. . .. . .. . .. . .. . .. . .. . .. . ... 9

Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2/14

STGD10NC60H

Electrical ratings

1

Electrical ratings
Table 1.
Symbol VCES IC(1) IC(1) ICL(2) VGE PTOT Tj

Absolute maximum ratings
Parameter Collector-emitter voltage (VGS = 0) Collector current (continuous) at TC = 25C Collector current (continuous) at TC = 100C Collector current (pulsed) Gate-emitter voltage Total dissipation at TC = 25C Operating junction temperature Value 600 20 10 40 20 60 55 to 150 Unit V A A A V W C

1. Calculated according to the iterative formula:
T T J ---- A --C I ( T ) = -----------------------------------------M------X----------------------------------------------CC R ×V (T , I ) THJ C CESAT(MAX) C C

2. Vclamp=480V, Tj=150C, RG=10, VGE=15V

Table 2.
Symbol Rthj-case Rthj-amb

Thermal resistance
Parameter Thermal resistance junction-case max Thermal resistance junction-ambient max Value 2.08 62.5 Unit C/W C/W

3/14

Electrical characteristics

STGD10NC60H

2

Electrical characteristics
(TCASE=25C unless otherwise specified) Table 3.
Symbol VBR(CES) ICES IGES VGE(th) VCE(sat) gfs

Static
Parameter Collector-emitter breakdown voltage Collector cut-off current (VGE = 0) Gate-emitter leakage current (VCE = 0) Gate threshold voltage Test conditions IC= 1mA, VGE= 0 VCE= Max rating,TC= 25C VCE=Max rating,TC= 125C VGE= 20V, VCE= 0 VCE= VGE, IC= 250 A 3.75 1.9 1.7 3.5 Min. 600 150 1 100 5.75 2.5 Typ. Max. Unit V A mA nA V V V S

Collector-emitter saturation VGE= 15V, IC= 5A voltage VGE= 15V, IC= 5A, Tc= 125C Forward transconductance VCE = 15V, IC= 5A

Table 4.
Symbol Cies Coes Cres Qg Qge Qgc

Dynamic
Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Test conditions VCE = 25V, f = 1MHz, VGE = 0 VCE = 390V, IC = 5A, VGE = 15V, (see Figure 16) Min. Typ. 365 43 8.3 19.2 4.5 7 Max. Unit pF pF pF nC nC nC

4/14

STGD10NC60H

Electrical characteristics

Table 5.
Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on tr(Voff) td(off) tf tr(Voff) td(off) tf

Switching on/off (inductive load)
Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope Off voltage rise time Turn-off delay time Current fall time Off voltage rise time Turn-off delay time Current fall time Test conditions VCC = 390V, IC = 5A , RG= 10 VGE= 15V, Figure 15. Figure 17. VCC = 390V, IC = 5A , RG= 10 VGE= 15V, Tj=125C Figure 15. Figure 17. Vcc = 390V, IC = 5A, , RGE = 10 VGE = 15V, Figure 15. Figure 17. Vcc = 390V, IC = 5A, RGE=10 VGE =15V, , Tj=125C Figure 15. Figure 17. Min. Typ. 14.2 5 1000 14 5 920 27 72 85 50 108 139 Max. Unit ns ns A/s ns ns A/s ns ns ns ns ns ns

Table 6.
Symbol Eon Eoff(1) Ets Eon Eoff(1) Ets

Switching energy (inductive load)
Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching Losses Total switching losses Test conditions VCC = 390V, IC = 5A , RG= 10 VGE=15V, Tj=25C (see Figure 17) VCC = 390V, IC = 5A , RG= 10 VGE= 15V, Tj= 125C (see Figure 17) Min. Typ. 31.8 95 126.8 61.8 173 234.8 Max. Unit J J J J J J

1. Turn-off losses include also the tail of the collector current

5/14

Electrical characteristics

STGD10NC60H

2.1
Figure 1.

Electrical characteristics (curves)
Output characteristics Figure 2. Transfer characteristics

Figure 3.

Transconductance

Figure 4.

Collector-emitter on voltage vs temperature

Figure 5.

Gate charge vs gate-source voltage Figure 6.

Capacitance variations

6/14

STGD10NC60H Figure 7. Normalized gate threshold voltage vs temperature Figure 8.

Electrical characteristics Collector-emitter on voltage vs collector current

Figure 9.

Normalized breakdown voltage vs temperature

Figure 10. Switching losses vs temperature

Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector current

7/14

Electrical characteristics Figure 13. Thermal Impedance Figure 14. Turn-off SOA

STGD10NC60H

8/14

STGD10NC60H

Test circuits

3

Test circuits
Figure 16. Gate charge test circuit

Figure 15. Test circuit for inductive load switching

Figure 17. Switching waveform

9/14

Package mechanical data

STGD10NC60H

4

Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com

10/14

STGD10NC60H

Package mechanical data

DPAK MECHANICAL DATA
mm. DIM. MIN. A A1 A2 B b4 C C2 D D1 E E1 e e1 H L (L1) L2 L4 R V2 2.2 0.9 0.03 0.64 5.2 0.45 0.48 6 5.1 6.4 4.7 2.28 4.4 9.35 1 2.8 0.8 0.6 0.2 0 8 0 1 0.023 0.008 8 4.6 10.1 0.173 0.368 0.039 0.110 0.031 0.039 6.6 0.252 0.185 0.090 0.181 0.397 TYP MAX. 2.4 1.1 0.23 0.9 5.4 0.6 0.6 6.2 MIN. 0.086 0.035 0.001 0.025 0.204 0.017 0.019 0.236 0.200 0.260 TYP. MAX. 0.094 0.043 0.009 0.035 0.212 0.023 0.023 0.244 inch

0068772-F

11/14

Packaging mechanical data

STGD10NC60H

5

Packaging mechanical data
DPAK FOOTPRINT

All dimensions are in millimeters

TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1. 5 12.8 20.2 16.4 50 22. 4 18. 4 13. 2 mm MIN. MAX . 330 0. 059 0.504 0.520 0. 795 0.645 0.724 1. 968 0.881 BULK QTY 2500 i n ch MIN. MAX. 12. 992

TAPE MECHANICAL DATA
DIM. A0 B0 B1 D D1 E F K0 P0 P1 P2 R
W

BASE QTY 2500

mm MIN. 6. 8 10.4 1. 5 1. 5 1.65 7. 4 2.55 3. 9 7. 9 1. 9 40
15.7 16.3

inch MIN. MAX . 7 0.267 0.275 0.409 0.417 0.476 0.059 0.063 0. 059 0.065 0.073 0.291 0.299 0.100 0.108 0.153 0.161 0.311 0.319 0.075 0.082 1. 574
0.618 0.641

MAX . 10. 6 12. 1 1.6 1. 85 7.6 2. 75 4.1 8.1 2.1

12/14

STGD10NC60H

Revision history

6

Revision history
Table 7.
Date 02-Apr-2007

Revision history
Revision 1 Initial release. Changes

13/14

STGD10NC60H

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com

14/14

Document Number: 13400

Untitled Document

Further Information
Contact Online Support (Registration Required)



All rights reserved © 2010 STMicroelectronics :: Terms Of Use :: Privacy Policy