About ST
Products
Applications
Support
Buy
News & Events
ST Worldwide
Contact Us
my.ST Login
Datasheets
|
Transistors
|
IGBTs
|
IGBTs, 600V
600 V - 8 A - short circuit rugged IGBT
Datasheet
Format:
(560 kb)
or
(14 kb)
Last Updated: 11/04/2008
Pages: 18
Raw Ascii Text
- (
Hide
)
(Unformatted textual content of the document used by search engines)
STGB8NC60KD - STGD8NC60KD STGF8NC60KD - STGP8NC60KD
600 V - 8 A - short circuit rugged IGBT
Features
Lower on voltage drop (VCE(sat)) Lower CRES / CIES ratio (no cross-conduction susceptibility) Very soft ultra fast recovery antiparallel diode Short circuit withstand time 10 s
TO-220
1 2 3
2 3 1
DPAK
2
Applications
High frequency motor controls SMPS and PFC in both hard switch and resonant topologies Motor drivers Figure 1.
1
3 2
3 1
TO-220FP
D²PAK
Description
This IGBT utilizes the advanced PowerMESHTM process resulting in an excellent trade-off between switching performance and low on-state behavior.
Internal schematic diagram
Table 1.
Device summary
Marking GB8NC60KD GD8NC60KD GF8NC60KD GP8NC60KD Package D²PAK DPAK TO-220FP TO-220 Packaging Tape and reel Tape and reel Tube Tube
Order codes STGB8NC60KDT4 STGD8NC60KDT4 STGF8NC60KD STGP8NC60KD
April 2008
Rev 2
1/18
www.st.com 18
Contents
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) . . .. . .. . .. . .. . ..... 7
3 4 5 6
Test circuit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2/18
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
Electrical ratings
1
Electrical ratings
Table 2. Absolute maximum ratings
Value Symbol Parameter D²PAK TO-220 VCES IC(1) IC(1) ICL(2) ICP(3) VGE IF IFSM Collector-emitter voltage (VGE = 0) Collector current (continuous) at TC = 25 C Collector current (continuous) at TC = 100 C Turn-off latching current Pulsed collector current Gate-emitter voltage Diode RMS forward current at TC = 25 C Surge not repetitive forward current tp = 10 ms sinusoidal Insulation withstand voltage (RMS) from all three leads to external hea sink ( t=1 s; TC = 25 C) Total dissipation at TC = 25 C Operating junction temperature Shor t circuit withstand time , (VCE = 0.5 VBR(CES) , TC = 125 C, RG = 10 VGE = 12 V)
T T J ---- A --C I ( T ) = -----------------------------------------M------X----------------------------------------------CC R ×V (T , I ) THJ C CESAT (MAX) C C
Unit DPAK TO-220FP 600 V 7 4 30 30 20 7 20 A A A A V A A
15 8
VISO PTOT Tj Tscw
-65
-62 55 to 150
2500 24
V W C
10
s
1. Calculated according to the iterative formula:
2. Vclamp = 80% (VCES), VGE=15 V, RG=10 , TJ=150 C 3. Pulse width limited by max junction temperature allowed
Table 3.
Thermal resistance
Value
Symbol
Parameter
D²PAK TO-220
Unit DPAK TO-220FP
Rthj-case Rthj-case Rthj-amb
Thermal resistance junction-case max IGBT Thermal resistance junction-case max diode Thermal resistance junction-ambient max
1.9 4
2.0 4.5 62.5
5.1 7
C/W C/W C/W 3/18
Electrical characteristics
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 4.
Symbol
Static
Parameter Test conditions Min. Typ. Max. Unit
Collector-emitter V(BR)CES breakdown voltage (VGE= 0) VCE(sat) VGE(th) ICES IGES gfs (1)
IC= 1 mA
600
V
Collector-emitter saturation VGE= 15 V, IC = 3 A voltage VGE= 15 V, IC = 3 A, TC = 125C Gate threshold voltage Collector cut-off current (VGE = 0) Gate-emitter leakage current (VCE = 0) Forward transconductance VCE= VGE, IC= 250 A VCE = 600 V VCE = 600 V, TC = 125 C VGE= 20 V VCE = 15 V, IC= 3 A 4.5
2.2 1.8
2.75
V V V A mA nA S
6.5 150 1 100 1.9
1. Pulse duration = 300 us, duty cycle 1.5 %
Table 5.
Symbol Cies Coes Cres Qg Qge Qgc
Dynamic
Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Test conditions VCE = 25 V, f = 1 MHz, VGE = 0 VCE = 390 V, IC = 3 A, VGE = 15 V, (see Figure 20) Min. Typ. Max. 380 46 8.5 19 5 9 Unit pF pF pF nC nC nC
Table 6.
Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on
Switching on/off (inductive load)
Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope Test conditions VCC = 390 V, IC = 3 A , RG= 10 VGE= 15 V (see Figure 21) VCC = 390 V, IC =3 A , RG= 10 VGE= 15 V, TC = 125 C (see Figure 21) Min. Typ. 17 6 655 16.5 6.5 575 Max. Unit ns ns A/s ns ns A/s
4/18
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD Table 6.
Symbol tr(Voff) td(off) tf tr(Voff) td(off) tf
Electrical characteristics
Switching on/off (inductive load) (continued)
Parameter Off voltage rise time Turn-off delay time Current fall time Off voltage rise time Turn-off delay time Current fall time Test conditions Vcc = 390 V, IC = 3 A, , RGE = 10 VGE =15 V (see Figure 21) Vcc = 390 V, IC = 3 A, , RGE=10 VGE =15 V, TC = 125 C (see Figure 21) Min. Typ. 33 72 82 60 106 136 Max. Unit ns ns ns ns ns ns
Table 7.
Symbol Eon(1) Eoff(2) Ets Eon(1) Eoff(2) Ets
Switching energy (inductive load)
Parameter Turn-on switching losses Turn-off switching losses Total switching losses Test conditions VCC = 390 V, IC = 3 A , RG= 10 VGE=15 V (see Figure 21) VCC = 390 V, IC = 3 A RG= 10 VGE= 15 V, , TC = 125 C (see Figure 21) Min. Typ. 55 85 140 Max. Unit J J J
Turn-on switching losses Turn-off switching losses Total switching losses
87 162 249
J J J
1. Eon is the turn-on losses when a typical diode is used in the test circuit in figure 2. If the IGBT is offered in a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the same temperature (25C and 125C) 2. Turn-off losses include also the tail of the collector current
Table 8.
Symbol VF t rr Qrr I rr m t rr Qrr I rr m
Collector-emitter diode
Parameter Forward on-voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current Test conditions IF = 3 A IF = 3 A, TC = 125 C IF = 3 A, VR = 30 V, di/dt = 100 A/s (see Figure 22) IF = 3 A,VR = 30 V, TC =125 C, di/dt = 100 A/s (see Figure 22) Min. Typ. 1.6 1.3 23.5 16.5 1.4 39 39 2 Max. 2.1 Unit V V ns nC A ns nC A
5/18
Electrical characteristics
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
2.1
Figure 2.
Electrical characteristics (curves)
Output characteristics Figure 3. Transfer characteristics
Figure 4.
Transconductance
Figure 5.
Collector-emitter on voltage vs temperature
Figure 6.
Gate charge vs gate-source voltage Figure 7.
Capacitance variations
6/18
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD Figure 8. Normalized gate threshold voltage vs temperature Figure 9.
Electrical characteristics
Collector-emitter on voltage vs collector current
Figure 10. Normalized breakdown voltage vs temperature
Figure 11. Switching losses vs temperature
Figure 12. Switching losses vs gate resistance Figure 13. Switching losses vs collector current
7/18
Electrical characteristics
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD Figure 15. Turn-off SOA
Figure 14. Thermal impedance for TO-220/ D²PAK
Figure 16. Forward voltage drop versus forward current
Figure 17. Thermal impedance for DPAK
Figure 18. Thermal impedance for TO-220FP
8/18
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
Test circuit
3
Test circuit
Figure 20. Gate charge test circuit
Figure 19. Test circuit for inductive load switching
Figure 21. Switching waveform
Figure 22. Diode recovery time waveform
9/18
Package mechanical data
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
10/18
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
Package mechanical data
TO-220 mechanical data
mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.48 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6
inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116
11/18
Package mechanical data
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
TO-252 (DPAK) mechanical data
DIM. A A1 A2 b b4 c c2 D D1 E E1 e e1 H L L1 L2 L4 R V2 0o 0.60 0. 20 8o 4.40 9.35 1 2. 80 0. 80 1 6.40 4. 70 2. 28 4.60 10.10 mm. min. 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 5. 10 6.60 typ max. 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20
0068772_G
12/18
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
Package mechanical data
D²PAK (TO-263) mechanical data
mm Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 2.54 4.88 15 2.49 2.29 1.27 1.30 0.4 0 8 0 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 Typ Max 4.60 0.23 0.93 1.70 0.60 1.36 9.35 10.40 Min 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334
inch Typ Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8
0079457_M
13/18
Package mechanical data
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
TO-220FP mechanical data
Dim. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Dia 28.6 9.80 2.9 15.90 9 3 mm. Min. 4.40 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.40 10 16 30.6 10.60 3.6 16.40 9.30 3.2 1.126 0.385 0.114 0.626 0.354 0.118 Typ Max. 4.60 2.7 2.75 0.70 1.00 1.50 1.50 5.20 2.70 10.40 M in. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch Typ. Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
A
B
L3 L6 L7
Dia
F1
D
F
G1 H
F2
L2 L5
E
123
L4
7012510-I
14/18
G
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
Packaging mechanical data
5
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1. 5 12.8 20.2 24.4 100 30. 4 26. 4 13. 2 mm MIN. MAX . 330 0. 059 0.504 0.520 0795 0.960 1.039 3. 937 1.197 BULK QTY 1000 i n ch MIN. MAX. 12. 992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MI N. 10. 5 15. 7 1.5 1. 59 1. 65 11.4 4.8 3.9 11.9 1.9 50 0. 25 23. 7 24.3 MAX. 10.7 15.9 1. 6 1.61 1.85 11.6 5. 0 4. 1 12.1 2. 1 i n ch MI N. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
* on sales type
15/18
Packaging mechanical data
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
DPAK FOOTPRINT
All dimensions are in millimeters
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1. 5 12.8 20.2 16.4 50 22. 4 18. 4 13. 2 mm MIN. MAX . 330 0. 059 0.504 0.520 0. 795 0.645 0.724 1. 968 0.881 BULK QTY 2500 i n ch MIN. MAX. 12. 992
TAPE MECHANICAL DATA
DIM. A0 B0 B1 D D1 E F K0 P0 P1 P2 R
W
BASE QTY 2500
mm MIN. 6. 8 10.4 1. 5 1. 5 1.65 7. 4 2.55 3. 9 7. 9 1. 9 40
15.7 16.3
inch MIN. MAX . 7 0.267 0.275 0.409 0.417 0.476 0.059 0.063 0. 059 0.065 0.073 0.291 0.299 0.100 0.108 0.153 0.161 0.311 0.319 0.075 0.082 1. 574
0.618 0.641
MAX . 10. 6 12. 1 1.6 1. 85 7.6 2. 75 4.1 8.1 2.1
16/18
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
Revision history
6
Revision history
Table 9.
Date 02-Oct-2007 01-Apr-2008
Document revision history
Revision 1 2 First release Updated Figure 14 and Figure 17 Changes
17/18
STGB8NC60KD - STGD8NC60KD - STGF8NC60KD - STGP8NC60KD
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
18/18
Document Number: 13940
Untitled Document
Further Information
Contact
Online Support
(Registration Required)
(560 kb)
