About ST
Products
Applications
Support
Buy
News & Events
ST Worldwide
Contact Us
my.ST Login
Datasheets
|
Transistors
|
IGBTs
|
IGBTs, 600V
20 A - 600 V - short circuit rugged IGBT
Datasheet
Format:
(584 kb)
or
(14 kb)
Last Updated: 30/05/2008
Pages: 17
Raw Ascii Text
- (
Hide
)
(Unformatted textual content of the document used by search engines)
STGB19NC60KD STGF19NC60KD - STGP19NC60KD
20 A - 600 V - short circuit rugged IGBT
Features
Low on-voltage drop (VCE(sat)) Low Cres / Cies ratio (no cross conduction susceptibility) Short circuit withstand time 10 s
1 3 2
3 1
IGBT co-packaged with ultra fast free-wheeling diode
TO-220
D2PAK
Applications
3
High frequency inverters Motor drivers
1
2
TO-220FP
Description
This IGBT utilizes the advanced PowerMESHTM process resulting in an excellent trade-off between switching performance and low on-state behavior. Figure 1. Internal schematic diagram
Table 1.
Device summary
Marking GB19NC60KD GF19NC60KD GP19NC60KD Package D2PAK TO-220FP TO-220 Packaging Tape and reel Tube Tube
Order codes STGB19NC60KDT4 STGF19NC60KD STGP19NC60KD
May 2008
Rev 2
1/17
www.st.com 17
Contents
STGB19NC60KD - STGF19NC60KD - STGP19NC60KD
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) . . .. . .. . .. . .. . ..... 7
3 4 5 6
Test circuits
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2/17
STGB19NC60KD - STGF19NC60KD - STGP19NC60KD
Electrical ratings
1
Electrical ratings
Table 2. Absolute maximum ratings
Value Symbol Parameter D2PAK TO-220 VCES IC(1) IC(1) ICL ICP
(2) (3)
Unit TO-220FP
Collector-emitter voltage (VGE = 0) Collector current (continuous) at TC = 25 C Collector current (continuous) at TC = 100 C Turn-off latching current Pulsed collector current Gate-emitter voltage Diode RMS forward current at TC = 25 C Surge non repetitive forward current tp = 10 ms sinusoidal Total dissipation at TC = 25 C Shor t circuit withstand time, VCE = 0.5 V(BR)CES Tj = 125 C, RG = 10 , VGE = 12 V Operating junction temperature 125 35 20
600 16 10 75 75 20 20 50 32 10 55 to 150
V A A A A V A A W s C
VGE IF IFSM PTOT tscw Tj
1.
Calculated according to the iterative formula:
TJ A X Tc I c ( T c ) = ---------------------------------(-M--------)----------------------------------------- R t h j c × V C E ( s a t ) ( M A X ) ( T c ,I c )
2. Vclamp = 80%,(VCES), Tj =150C, RG = 10 , VGE = 15 V 3. Pulse width limited by max. junction temperature allowed
Table 3.
Thermal resistance
Value Unit TO-220FP 3.9 5.6 62.5 C/W C/W C/W
Symbol
Parameter
D2PAK TO-220
Thermal resistance junction-case IGBT max. Rthj-case Thermal resistance junction-case diode max.
0.95 3
Rthj-amb Thermal resistance junction-ambient max.
3/17
Electrical characteristics
STGB19NC60KD - STGF19NC60KD - STGP19NC60KD
2
Electrical characteristics
(TCASE = 25 C unless otherwise specified) Table 4.
Symbol V(BR)CES
Static
Parameter Test conditions Min. 600 2.0 1.8 150 1 4.5 6.5 100 15 2.75 Typ. Max. Unit V V V A mA V nA S
Collector-emitter breakdown IC = 1 mA voltage (VGE= 0) Collector-emitter saturation voltage Collector cut-off current (VGE = 0) Gate threshold voltage Gate-emitter leakage current (VCE = 0) Forward transconductance VGE = 15 V, IC = 12 A VGE = 15 V, IC = 12 A, Tc = 125 C VCE = 600 V VCE = 600 V, TC = 125 C VCE = VGE, IC = 250 A VGE = 20 V VCE = 15 V , IC = 12 A
VCE(sat)
ICES VGE(th) IGES gfs (1)
1. Pulsed: Pulse duration = 300 s, duty cycle 1.5%
Table 5.
Symbol Cies Coes Cres Qg Qge Qgc
Dynamic
Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Test conditions Min. Typ. 1170 127 28 55 11 26 Max. Unit pF pF pF nC nC nC
VCE = 25 V, f = 1 MHz, VGE = 0 VCE = 480 V, IC = 12 A, VGE = 15 V (see Figure 19)
4/17
STGB19NC60KD - STGF19NC60KD - STGP19NC60KD
Electrical characteristics
Table 6.
Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on tr(Voff) td(off) tf tr(Voff) td(off) tf
Switching on/off (inductive load)
Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope Off voltage rise time Turn-off delay time Current fall time Off voltage rise time Turn-off delay time Current fall time Test conditions VCC = 480 V, IC = 12 A , RG = 10 VGE = 15 V, (see Figure 18) VCC = 480 V, IC = 12 A , RG = 10 VGE = 15 V, Tc = 125 C (see Figure 18) VCC = 480 V, IC = 12 A , RG = 10 VGE = 15 V, (see Figure 18) Vcc = 480 V, IC = 12 A, , RG = 10 VGE = 15 V Tc = 125 C (see Figure 18) Min. Typ. 30 8 1450 30 8 1380 35 105 85 65 145 125 Max. Unit ns ns A/s ns ns A/s ns ns ns ns ns ns
Table 7.
Symbol Eon Eoff (1) Ets Eon Eoff (1) Ets
Switching energy (inductive load)
Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching losses Total switching losses Test conditions VCC = 480 V, IC = 12 A , RG = 10 VGE = 15 V, (see Figure 18) VCC = 480 V, IC = 12 A , RG = 10 VGE = 15 V, TC = 125 C (see Figure 18) Min Typ. 165 255 420 250 445 695 Max Unit J J J J J J
1. Turn-off losses include also the tail of the collector current.
5/17
Electrical characteristics
STGB19NC60KD - STGF19NC60KD - STGP19NC60KD
Table 8.
Symbol VF t rr Qrr I rr m t rr Qrr I rr m
Collector-emitter diode
Parameter Forward on-voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current Test conditions IF = 12 A IF = 12 A, Tc = 125 C IF = 12 A,VR = 40 V, di/dt = 100 A/s (see Figure 21) IF = 12 A,VR = 40 V, Tc =125 C, di/dt = 100 A/s (see Figure 21) Min. Typ. 1.9 1.6 31 30 2 50 70 4 Max. Unit V V ns nC A ns nC A
6/17
STGB19NC60KD - STGF19NC60KD - STGP19NC60KD
Electrical characteristics
2.1
Figure 2.
IC(A)
Electrical characteristics (curves)
Output characteristics
HV43020
Figure 3.
Transfer characteristics
HV43025 VCE = 15 V
IC(A)
100
VGE=15V
100
80
14V
80
13V 60 12V 40 11V 20 10V 9V 0 0 5 10 15 20 25 30 8V VCE(V)
0 0 3 5 8 10 13 15 20 40 60
VGE(V)
Figure 4.
Gfs(S) 8 7.5 7 6.5 6 5.5 5 4.5 4 3.5 3 2.5 2 1.5 2
Transconductance
HV43110 TJ=-50C
Figure 5.
VCE(sat) (V) 2.4 2.3
Collector-emitter on voltage vs temperature
HV43100_b
25A
TJ=25C
2.1 2.0 1.8 12A
TJ=125C
1.7 1.5 1.4 1.2 6A
4
6
8
10
12 IC(A)
-75
-50 -25
0
25
50
75 100 125 150 TJ(C)
Figure 6.
Gate charge vs gate-source voltage Figure 7.
C(pF)
Capacitance variations
HV43000
2000
1500
Cies
1000
500
Coes
Cres
0 0 10 20 30 40
VCE(V)
7/17
Electrical characteristics Figure 8.
STGB19NC60KD - STGF19NC60KD - STGP19NC60KD Figure 9.
VCE(sat) (V) 2.55 2.3 2.05 1.8 1.55 25C -50C
Normalized gate threshold voltage vs temperature
HV43070
Collector-emitter on voltage vs collector current
HV43090
VGE(th)
(norm)
1.15 1.10 1.05 1.00 0.95 0.90 0.85 0.80 0.75 0.70 -100 -50 0
IC=250A
1.3 1.05 0.8
50 100 150 TJ(C)
125C 0 5 10 15 20 25 30 35 40 IC(A)
Figure 10. Normalized breakdown voltage vs temperature
BVCES
(norm)
Figure 11. Switching losses vs temperature
HV43080
1.10 1.08 1.06 1.04 1.02 1.00 0.98 0.96 0.94 -100
IC=250A
-50
0
50
100
150
TJ(C)
Figure 12. Switching losses vs gate resistance Figure 13. Switching losses vs collector current
8/17
STGB19NC60KD - STGF19NC60KD - STGP19NC60KD Figure 14. Turn-off SOA
Electrical characteristics
Figure 15. Emitter-collector diode characteristics
Figure 16. Thermal impedance for TO-220, D˛PAK
Figure 17. Thermal impedance for TO-220FP
9/17
Test circuits
STGB19NC60KD - STGF19NC60KD - STGP19NC60KD
3
Test circuits
Figure 19. Gate charge test circuit
Figure 18. Test circuit for inductive load switching
Figure 20. Switching waveforms
Figure 21. Diode recovery times waveform
10/17
STGB19NC60KD - STGF19NC60KD - STGP19NC60KD
Package mechanical data
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
11/17
Package mechanical data
STGB19NC60KD - STGF19NC60KD - STGP19NC60KD
TO-220 mechanical data
mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.48 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6
inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116
12/17
STGB19NC60KD - STGF19NC60KD - STGP19NC60KD
Package mechanical data
TO-220FP mechanical data
Dim. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Dia 28.6 9.80 2.9 15.90 9 3 mm. Min. 4.40 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.40 10 16 30.6 10.60 3.6 16.40 9.30 3.2 1.126 0.385 0.114 0.626 0.354 0.118 Typ Max. 4.60 2.7 2.75 0.70 1.00 1.50 1.50 5.20 2.70 10.40 M in. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch Typ. Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
A
B
L3 L6 L7
Dia
F1
D
F
G1 H
F2
E
L2 L5
123
L4
7012510-I
G
13/17
Package mechanical data
STGB19NC60KD - STGF19NC60KD - STGP19NC60KD
D˛PAK (TO-263) mechanical data
mm Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 2.54 4.88 15 2.49 2.29 1.27 1.30 0.4 0 8 0 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 Typ Max 4.60 0.23 0.93 1.70 0.60 1.36 9.35 10.40 Min 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334
inch Typ Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8
0079457_M
14/17
STGB19NC60KD - STGF19NC60KD - STGP19NC60KD
Packing mechanical data
5
Packing mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1. 5 12.8 20.2 24.4 100 30. 4 26. 4 13. 2 mm MIN. MAX . 330 0. 059 0.504 0.520 0795 0.960 1.039 3. 937 1.197 BULK QTY 1000 i n ch MIN. MAX. 12. 992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MI N. 10. 5 15. 7 1.5 1. 59 1. 65 11.4 4.8 3.9 11.9 1.9 50 0. 25 23. 7 24.3 MAX. 10.7 15.9 1. 6 1.61 1.85 11.6 5. 0 4. 1 12.1 2. 1 i n ch MI N. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
* on sales type
15/17
Revision history
STGB19NC60KD - STGF19NC60KD - STGP19NC60KD
6
Revision history
Table 9.
Date 08-May-2008 28-May-2008
Document revision history
Revision 1 2 Initial release Value on Table 3: Thermal resistance has been changed. Inser ted Figure 16: Thermal impedance for TO-220, D˛PAK and Figure 17: Thermal impedance for TO-220FP Changes
16/17
STGB19NC60KD - STGF19NC60KD - STGP19NC60KD
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
17/17
Document Number: 14701
Untitled Document
Further Information
Contact
Online Support
(Registration Required)
(584 kb)
